Topics:

• How to set temperature probe feature in an E Series Oven
• Troubleshooting if temperature probe isn't working
• Does oven door need to be shut to use probe?
• Where to purchase replacement probes

Answer:

Set the Probe

Note that the following instructions are for Legacy products. For current E Series Ovens, refer to Wolf E Series Oven Temperature Probe Use.

1. Touch desired cooking mode.
   • Probe cannot be used with Broil or Convection Broil.
2. Touch ENTER to select preset temperature or use number pads to change temperature, then touch ENTER.
3. Insert probe into thickest area of the food.
   • When making bread, cook for approximately 10 minutes before inserting probe.
4. When preheat is complete, use a pot holder to lift probe receptacle cover, then insert probe.
5. Touch TEMP PROBE.
6. Use number pads to select temperature, then touch ENTER.
   • Carving Temp appears on the display. This is the internal temperature.
   • The probe temperature appears in the display until it reaches the setpoint.
7. An audible chime indicates internal temperature has reached probe setpoint.
   • Remove, then reinsert probe to verify internal temperature.

Refer to the product Use and Care Guide for temperature probe features and setting controls.

Troubleshooting

If the probe is not working:

1. Confirm proper mode is in use. Not all modes can use a temperature probe.
2. Try removing and reinserting the probe. The probe should click into place.
   
3. Be sure that the probe is fully seated in the probe receptacle before adjusting the probe temperature setting.
4. If any debris is noticeable in the receptacle, use a compressed air can to help remove it.

See also:

• Probe Shorted
• Wolf Oven with Probe Flashing on Display or Probe Does Not Register

About the Probe

The temperature probe measures the internal temperature of food without opening the oven door.

• The probe is designed to be used while the oven is cooking. Make sure that the probe does not directly touch the oven wall or door.
• Calculating a total cooking time by weight is no longer necessary using this feature.

 For information about other models, refer to How to Use a Temperature Probe.

Purchase Probe

To order additional probes, or if a replacement probe is needed, contact the Factory Certified Parts Distributor in your area to order parts.

• E Series Oven probes use part number 823261
• For other models, refer to How Many Temperature Probes Come with a Product including part numbers for replacement probes.

Genuine Sub-Zero, Wolf, and Cove parts are available by calling the Factory Certified Parts Distributor in your area. Only filters and cleaners are available for online purchase in the Sub-Zero, Wolf, and Cove Store. Other parts are not available for purchase online. Use Locator to find the Parts Distributor for your area.