Skip to main content

Loose Handle on 500 Series Stainless Steel Door

Topics:

  • Handle on a 500 Series stainless steel door is loose
  • Curved style handle is loose
  • How to tighten a stainless steel handle
  • 532SS handle is loose

Troubleshooting:

500 Series units with factory Stainless Steel panels (e.g. 532SS, 550SS) use the following steps to tighten the handle:

  1. Remove the trim molding on handle side of door.
  2. Remove trim screws and remove trim.
  3. Slide entire panel with handle out far enough to gain access to screw.
  4. Apply thread lock to screw and retighten.
  5. Slide panel and handle back into place (ensure screw head slides under handle mounting bracket mounted to door).
  6. Re-install trim, screws and molding.

Answer:

Contact a Factory Certified Parts Distributor to order parts.

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820