Topics:

• App cannot find any Sub-Zero, Wolf, or Cove appliances to connect
• App cannot find appliance or is stuck searching for appliance
• No appliances show up on the list to connect
• Previously connected appliance now disappeared from app
• Appliance missing from app after unit repair

Troubleshooting:

Product-Specific Instructions

Only certain products are manufactured ready to connect. Refer to links to verify that an appliance can be connected.

Sub-Zero:

• May be connected ready: Recent Classic, Designer, and PRO Series
• Cannot be connected: Older models, such as 400, 500, 600, or 700 series

Wolf:

• May be connected ready: E Series and M Series Wall Ovens, Dual Fuel Ranges, Induction Ranges
• Cannot be connected: Microwaves, Speed Ovens, Convection Steam Ovens, Cooktops, Wolf Gourmet Countertop Appliances

Cove:

• Cove Dishwashers are all connected ready.

General Troubleshooting

1. Appliance Connectivity Settings

1. After verifying that the appliance can connect, verify that the connect setting is turned on for Sub-Zero refrigerators, Cove Dishwashers, or Wolf ranges:
   • Induction Range Oven Connected Feature 
   • Dual Fuel Range Oven Connected Feature
   • Sub-Zero Refrigerator Connected Feature 
   • Cove Dishwasher Connected Feature
2. For Wolf Ranges and current E Series Ovens, verify that the appliance is not in Standby Mode, which turns off power to the display and connected module when not in use. 
   • E Series Oven Standby Power
   • Legacy Induction Range Clock Standby Power (Sleep Mode)
   • Legacy Dual Fuel Range Clock Standby Power (Sleep Mode)

2. Reset App and Appliance

1. If the appliance was previously paired or attempted to be paired, forget the appliance from the device settings: 
   • Open the mobile device Settings and tap Bluetooth.
   • Locate the appliance that will not connect and tap the Information button.
   • Tap Forget this Device.
   • Open the Sub-Zero Group Owner's App and attempt pairing again 
2. Restart the device the app is on and try the app again.
   
   • Note that If more than one phone is used to connect, the appliance may only be paired to one phone during initial setup. The second phone can be paired after setup is complete on the first.
3. Turn the home circuit breaker to the unit off for 30 seconds and back on again. Retest the unit operation.

3. Mobile Device Connectivity Settings

1. Verify that the device Bluetooth is turned on and that you are within 20 feet of the appliance.
   
2. Verify that the Sub-Zero Group Owner's App has permission to use Bluetooth:
   • iOS: Go to Settings > tap the Sub-Zero Group Owner's App > verify Bluetooth is enabled.
   • Android: Go to Settings > tap Apps > tap the Sub-Zero Group Owner's App > tap Permissions.
     • For Android 11 or Older: Allow Location
     • For Android 12 or Newer: Enable Bluetooth