Topics:

• Under-Cabinet Hood Insert (VU) hood installation
• Installation hardware for VU models
• Side mount clip, part 828274

Troubleshooting:

1. Insert the power cord above or into an adjacent cabinet.
   • Place the hood and the bottom assembly on a protected work surface under the cabinet opening.
   • NOTE: The electrical connection to the bottom assembly will stay attached during the installation.
2. Insert the hood into the opening.
   • The support brackets will temporarily support the weight of the hood.
   • If the bottom of the enclosure is too thick to engage the brackets, the hood must be supported until the mounting screws are installed.
3. Turn the support bracket screws clockwise to draw the hood flange to the bottom of the enclosure.
4. Secure the hood flange to the enclosure using the mounting screws provided.
5. Press the bottom hood assembly against the bottom hood flange and secure with the six screws.
6. Insert the blower plug into the blower receptacle.
7. Insert the two tabs on the top of the transformer behind the two tabs on the hood and secure the bottom of the transformer with one screw.

Answer:

Replacement mounting brackets are available using part number 828274.

• Genuine Sub-Zero, Wolf, and Cove parts are available by calling the Factory Certified Parts Distributor in your area. Only filters and cleaners are available for online purchase in the Sub-Zero, Wolf, and Cove Store. Other parts are not available for purchase online. Use Locator to find the Parts Distributor for your area.