Skip to main content

Wolf Speed Oven Door Removal

Topics:

  • Remove Wolf Speed Oven (SPO) door
  • Tools needed to remove a door on an SPO
  • Wolf Speed Oven door replacement

Answer:

It is strongly recommended to have Factory Certified Service remove an oven door. Performance may be affected if door is not properly installed.

Tools Required:

  • T-20 Torx bit

Oven Door Removal:

  1. Open the oven door. 
  2. From underneath, use a T-20 Torx bit to remove the screws from the hinge covers. 
  3. Remove the door from the appliance.

Oven Door Installation:

  1. With the door hinges set to a 90° angle, align the door with the oven cavity. Slide the door hinges into the openings on the bottom of the unit.
    • The door latches should engage, holding the door onto the unit.
  2. Use a T-20 Torx bit to install the screws into the hinge covers.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820