Topics:

• Instructions to install center bracket for M Series horizontal dual installation
• Dual installation trim, part # 826001, instruction sheet # 9002516
• Install dual installation bracket for M Series Ovens installed side by side
• How much space to leave between two M Series Ovens installed next to each other
• How close can two M Series Ovens be installed?

Answer:

M Series Dual Installation Instructions detail the installation process.

• This dual installation kit is required when two M Series Ovens are installed side by side, unless the distance between the two openings is 6" or greater.
  • If stacking the ovens, refer to Stack Two Single Wall Ovens.
• To install M Series Ovens side by side without the dual installation bracket, allow 6" between the products. This ensures proper airflow and space for heat to dissipate, which helps avoid damage to surrounding cabinetry.
• One opening is required unless the units will be 6" or more apart.
• Units must either be installed side by side with the dual installation kit, or the openings must be at least 6" apart.
  • The dual installation kit connects the two units together.
  • There is no way to extend the bracket to have the units sit further apart.
• Dual installation kit is for use in both standard and flush inset installations.
• The mounting bracket is 1.82" wide and adds no width to the opening.
• The mounting bracket is not decorative trim. The oven face frame secures to the bracket, and the bracket is hidden behind the ovens.
• It is not possible to place a decorative trim between the units, unless the openings are at least 6" apart.
• A full depth cabinet panel between two M Series Ovens is not sufficient to install the units side by side. A dual installation trim kit is required.

See also,

• Wolf Stacked Installations