Skip to main content
E-mail This Answer

Wolf Dual Fuel Range (DF3050, DF3650, DF4850, DF6050) Clock Standby Power

Topics:

  • Dual Fuel Range (DF) control goes blank
  • Oven control panel display is blank or ECH goes dim
  • Display goes blank on Dual Fuel controls
  • ECH Sleep mode
  • How to enable or disable standby power on DF3050, DF3650, DF4850, and DF6050 Dual Fuel Ranges
  • Clock will not stay lit

Answer:

When Standby is on, the display is off while the oven is idle. When Standby is off, the display shows the clock while the oven is idle.

To enable or disable Standby Mode:

  1. Open the electronic control housing (ECH) and touch the screen. The Home screen appears.
  2. Touch Settings. The Settings screen appears.
  3. Scroll to Standby on the ECH. Touch Standby. The Standby screen appears.
  4. Scroll left or right to highlight the On or Off option. Touch the highlighted selection. The Standby set screen appears.
  5. Touch Set. The Home screen appears.

Refer to the product Use and Care Guide for further information.

Related Questions

Results per page
    Results 1-8 of 195

    DID THIS ANSWER YOUR QUESTION?

    Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

    Ask Your Question

    We're standing by with answers

    Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

     

    Call us at (800) 222-7820