Skip to main content
E-mail This Answer

Replace a 30" Legacy Convection Steam Oven with a 30" Convection Steam Oven

Topics:

  • What oven replaces a Legacy Convection Steam Oven (CSO)?
  • Is a 30" Convection Steam Oven (CSO3050) a direct replacement for a 30" Legacy Convection Steam Oven (CSO30)?
  • Installation differences between the old CSO and new CSO models
  • Replace a Legacy Convection Steam Oven with the plumbed model
  • What are the differences in opening depth, width and height for the Legacy CSO versus the current CSO?

Answer:

Refer to the following chart for information on replacing a 30" Legacy Convection Steam Oven (CSO30) with a Convection Steam Oven (CSO3050).

Non-Plumbed Models

To replace a CSO30 model with CSO3050:

  • IMPORTANT: The chart addresses cosmetic appearance compatibility only; products may have differences in installation requirements, interior or exterior dimensions, or interior capacity.
Opening DimensionsTrim OverlapElectrical Differences

Depth:

  • No change needed
  • CSO3050 requires 23" opening depth. However, the location of electrical supply within opening may require additional cabinet depth
  • CSO30 required 23" opening depth

Width:

  • Likely needs to change
  • CSO3050 requires 28-1/2"
  • CSO30 required 22-1/2"

Height:

  • No change needed
  • CSO3050 requires 17-11/16"
  • CSO30 required 17-11/16"

CSO3050:

  • 3/16" Top
  • 0" Bottom
  • 11/16" Sides

CSO30:

  • 3/16" Top
  • 0" Bottom
  • 3-7/8" Sides

Electrical Supply:

  • No change needed
  • CSO3050: Grounded, 240/208 VAC, 60 Hz
  • CSO30: Grounded, 240/208 VAC, 60 Hz

Service: 

  • No change needed
  • CSO3050: 20 amp dedicated circuit
  • CSO30: 20 amp dedicated circuit

Conduit/Receptacle:

  • Needs to change
  • CSO3050: 4' (1.2 m) (conduit)
  • CSO30: Old CSO: NEMA 6-20R grounding-type (receptacle)

Power Cord: 

  • CSO3050: No power cord
  • CSO30: 6' (1.8 m)

Plumbed Models

To replace CSO30 with CSOP3050 (plumbed):

  • It is possible to replace a 30" Legacy CSO with a 30" CSO Plumbed model.
Plumbing Requirements

Water Connection:

  • 6.5' (2m) braided tubing with 3/8" female compression fitting. 

Drain Connection:

  • 10' (3m) corrugated tubing

Pressure:

  • 15-145 psi (1/10 bar)

Refer to the product Installation Guides for further information:

Refer to the Wolf Design Guide for design specifications.

Contact a local dealer for further sales information.

Related Questions

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820