Gas Cooktop Installation Hardware
Topics:
- Gas Cooktop (CT and CG Models) installation kit
- Part number 801345, 801350, 815541, 815515, 826950
- Regulator, clamp kit, and foam seal part numbers
- Hardware is missing to install a Gas CT and CG Gas Cooktops
- What hardware is needed to install a cooktop?
Answer:
The hold down clamp kit, part 801345, includes everything needed for installing the CT and CG Transitional and Professional Gas Cooktops.
- Kit includes two clamps.
- Refer to the chart below for individual parts included with hold down clamp kit if any are missing.
- The clamp and scrubber sponge are not available individually.
Wolf Installation Kit | Part # |
| Hold Down Clamp Kit | 801345 |
| Hold Down Clamp Screws | 801350 |
| Sheet Metal Screws | 801351 |
| U-Type Speed Nut | 801349 |
Gasket, Rubber, Cooktop Surround (foam seal) | 815541 |
| Screw Grommet, Hold Down | 801496 |
Regulator, Gas Valve* | 815515 |
*The CG Gas Cooktops come with the regulator already installed inside the unit.
Parts included with the CG365C Contemporary Gas Cooktop installation kit, part number 826950:
| Component | Qty |
| Tube of Clear RTV Sealant | 1 |
| Pair of Disposable Gloves | 1 |
| Petroleum Jelly | 1 |
| Plastic Scraper | 1 |
See also, CG Contemporary Gas Cooktop Knob Spacers.
Contact a Factory Certified Parts Distributor to order parts. Refer to the product Installation Guide for further information.
DID THIS ANSWER YOUR QUESTION?
We're standing by with answers
Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.
Call us at (800) 222-7820