Topics:

• The oven temperature display is flashing
• The oven selector knob window is blank, does not work, or has blinking numbers or dashes (-- or ---)
• The oven does not work on one or all modes, does not show temperatures
• Oven shut off during use
• Valve stem is broken

Cause:

• Intermittent power outage
• Power surge
• Control board needs refreshing
• Selector switch failure
• Harness between selector switch and ECH is faulty or loose

Troubleshooting:

1. Verify the time of day clock is set.
   • The oven will not work if the clock is not set.
   • Refer to Dual Fuel Range Set Time of Day Clock for instructions.
2. Pull the temperature knob out and reinsert fully.
   
3. Turn the circuit breaker off for a minute, and then turn it back on.
4. Try turning the oven on to any mode to see if the display appears in the window.
5. Clean metal tip or contact on oven knob with a clean, dry cloth.
6. For double oven models, if the other oven control knob is working:
   1. Turn both ovens off.
   2. Remove both oven knobs.
   3. Place the working oven knob in the receptacle where the malfunctioning knob was before.
   4. Test if the oven operates. If it does, a new oven control knob may be required to replace the malfunctioning one.
7. If a knob (valve) stem is broken, contact Factory Certified Service to schedule an appointment for repair.

See also:

• Burner or Oven Knob Stuck or Loose
• Wolf Dual Fuel Range Does Not Turn On
• Dual Fuel Control Display Blank or Dim and Unit Works

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.