Topics:

• How to install dual installation kit, part number 7004808, 7004809, 7004810, 7004811, 7004812, 7004813, 7012623, 7012624, 7020161, 7020162, 7020163
• Dual installation kit with dual wide grille for overlay, flush inset, or stainless models
• Instruction sheet 7010064 for 60", 66", and 72" dual installation kits with dual grilles
• List of components included with this kit
• Dual installation kit for custom overlay, flush inset panel, or standard stainless steel wrapped door applications using a single grille for two units
• Brackets that attach units together at the front not drilled for mounting

Answer:

Classic Series (BI) Overlay or Flush Inset Dual Installation Kit with Dual Wide Grille Instructions detail the installation process.

• Kit includes:
  • Heater
  • Trim strip to cover center opening
  • Installation hardware
  • Dual wide grille
    • The dual wide grille is not available for separate purchase.
  • Dual wide kickplate
  • Instructions
• Works with 30" and 36" Classic Series (BI) models, model WS-30, and model BW-30.
  • If the two units are opposite-hinged and installed handle-to-handle, they can be installed in a dual installation application.
  • Units with the same door swing require a minimum 2" filler strip between them. See Classic Series Dual Installation Filler Strip.
• Additional opening space is not required when installing a dual installation heater kit.
  • The dual installation grille accommodates an 84" opening height. A dual wide grille is not available for other heights.
  • The center trim strip is 70-7/8" long.
• The heater applies to the right side of the leftmost unit.
• The shiny foil side of the heater faces in toward the unit when installed.