Topics:

• Are instructions available for replacing the light bulb on a 200 Series Undercounter product?
• How to remove the light diffuser on a 245, 249R, 249RP, or 249FF
• How to remove the light shield on a 200 Series Undercounter unit

Answer:

Light bulb replacement instructions can be found in the product use and care manual.

• All 200 Series Undercounter unit lights are 25 watt appliance bulbs.
• Light bulbs are available locally, or can be ordered through a Factory Certified Parts Distributor using part number 7014674.
• A lower watt light bulb may be used, if desired. Do not use a lightbulb greater than 25 watts.
• LED bulbs may be use as replacements, if desired.
• See below for bulb replacement instructions.

1. Remove upper shelf.
2. Pull control knob off.
3. Grip refrigerator control diffuser firmly on top and bottom and pull out of position.
4. Unscrew light bulb to remove, and install new bulb.
5. Install the control diffuser and control knob.

1. The light bulb is found beneath the freezer evaporator.
2. Reach up underneath behind the right-hand side of the freezer section.
3. Unscrew bulb and replace.

1. Remove the three screws from the light bracket.
2. Remove bracket and reach behind the light diffuser to unscrew the bulb.
3. Install new bulb, and replace light bracket and screws.

1. Light bulb is mounted behind the left side of the blower fan assembly, at the top of the back wall of the freezer.
2. Unscrew bulb and replace.